diff --git a/drivers/phy/phy-imx8mq-usb.c b/drivers/phy/phy-imx8mq-usb.c
index 69f01de..9fa78ef 100644
--- a/drivers/phy/phy-imx8mq-usb.c
+++ b/drivers/phy/phy-imx8mq-usb.c
@@ -14,6 +14,8 @@
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <clk.h>
+#include <dm/device_compat.h>
+#include <power/regulator.h>
 
 #define PHY_CTRL0			0x0
 #define PHY_CTRL0_REF_SSP_EN		BIT(2)
@@ -81,6 +83,7 @@
 #endif
 	void __iomem *base;
 	enum imx8mpq_phy_type type;
+	struct udevice *vbus_supply;
 };
 
 static const struct udevice_id imx8mq_usb_phy_of_match[] = {
@@ -173,9 +176,9 @@
 	struct udevice *dev = usb_phy->dev;
 	struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev);
 	u32 value;
+	int ret;
 
 #if CONFIG_IS_ENABLED(CLK)
-	int ret;
 	ret = clk_enable(&imx_phy->phy_clk);
 	if (ret) {
 		printf("Failed to enable usb phy clock\n");
@@ -183,12 +186,26 @@
 	}
 #endif
 
+	if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply) {
+		ret = regulator_set_enable_if_allowed(imx_phy->vbus_supply, true);
+		if (ret && ret != -ENOSYS) {
+			dev_err(dev, "Failed to enable VBUS regulator: %d\n", ret);
+			goto err;
+		}
+	}
+
 	/* Disable rx term override */
 	value = readl(imx_phy->base + PHY_CTRL6);
 	value &= ~PHY_CTRL6_RXTERM_OVERRIDE_SEL;
 	writel(value, imx_phy->base + PHY_CTRL6);
 
 	return 0;
+
+err:
+#if CONFIG_IS_ENABLED(CLK)
+	clk_disable(&imx_phy->phy_clk);
+#endif
+	return ret;
 }
 
 static int imx8mq_usb_phy_power_off(struct phy *usb_phy)
@@ -196,6 +213,7 @@
 	struct udevice *dev = usb_phy->dev;
 	struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev);
 	u32 value;
+	int ret;
 
 	/* Override rx term to be 0 */
 	value = readl(imx_phy->base + PHY_CTRL6);
@@ -206,6 +224,14 @@
 	clk_disable(&imx_phy->phy_clk);
 #endif
 
+	if (CONFIG_IS_ENABLED(DM_REGULATOR) && imx_phy->vbus_supply) {
+		ret = regulator_set_enable_if_allowed(imx_phy->vbus_supply, false);
+		if (ret && ret != -ENOSYS) {
+			dev_err(dev, "Failed to disable VBUS regulator: %d\n", ret);
+			return ret;
+		}
+	}
+
 	return 0;
 }
 
@@ -224,6 +250,7 @@
 int imx8mq_usb_phy_probe(struct udevice *dev)
 {
 	struct imx8mq_usb_phy *priv = dev_get_priv(dev);
+	int ret;
 
 	priv->type = dev_get_driver_data(dev);
 	priv->base = dev_read_addr_ptr(dev);
@@ -232,8 +259,6 @@
 		return -EINVAL;
 
 #if CONFIG_IS_ENABLED(CLK)
-	int ret;
-
 	/* Assigned clock already set clock */
 	ret = clk_get_by_name(dev, "phy", &priv->phy_clk);
 	if (ret) {
@@ -241,6 +266,14 @@
 		return ret;
 	}
 #endif
+	if (CONFIG_IS_ENABLED(DM_REGULATOR)) {
+		ret = device_get_supply_regulator(dev, "vbus-supply",
+						  &priv->vbus_supply);
+		if (ret && ret != -ENOENT) {
+			dev_err(dev, "Failed to get VBUS regulator: %d\n", ret);
+			return ret;
+		}
+	}
 
 	return 0;
 }